HP Smart Update Manager (User Guide) - Manual (Page 42)

In Linux, the negative return codes are reported. These return codes are determined by subtracting
the negative value from 256.
Text Windows Linux Value Return code
The installation was successful. 0 0 0 SUCCESS_NO_REBOOT
The installation was successful, but a
reboot is required. 1 1 1 SUCCESS_REBOOT
The component was current or not
required. 3 3 3 SUCCESS_NOT_REQUIRED
A general failure occurred. For details,
see the error log. 255 255 -1 FAILURE_GENERAL
A bad input parameter was
encountered. 254 254 -2 FAILURE_BAD_PARM
The installation of the component
failed. 253 253 -3 FAILURE_COMPONENT_FAILED
Windows smart-component return codes
Meaning Error level
The smart component was not installed. For more
information, see the log file. 0
The smart component was installed successfully. 1
The smart component was nstalled successfully, but the
system must be restarted. 2
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install. 3
Linux smart-component return codes
Single-target servers:
Meaning Error level
The smart component was installed successfully. 0
The smart component was installed successfully, but the
system must be restarted. 1
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install. 2
The smart component was not installed. For more
information, see the log file. 3
Multi-target servers:
Meaning Error level
The installation of the deliverable was successful. No reboot
is required. 0
The installation of the deliverable was successful. Reboot
is required for the deliverable to be enabled. 1
42 Using scripts to deploy updates