HP Smart Update Manager (User Guide) User Manual
Page 48
Possible values
Description
Parameter
The default of OmitHost causes the
host to be put in a failure state, and
no installation is attempted on it.
OmitComponent
clears the affected
components and proceeds with any
updates that do not have dependency
failures. Force attempts all updates,
even if they have dependency failures.
IP address, DNS name
This parameter is the IP address or the
DNS name of a remote server, remote
HOST
iLO NIC port, Virtual Connect Ethernet
or Fibre Channel Module for c-Class
BladeSystem, or BladeSystem OA.
When two OAs are in an enclosure,
this parameter is the active OA. When
specifying the IP address, you can use
either the IPv4 or IPv6 format.
This parameter specifies an already
defined group name in the HP SUM
GUI.
Logs in to the target hosts with your
user ID.
UID
Uses the password for the user ID
specified in the UID.
PWD
The password is used to log in to
target hosts.
Log file name
Redirects the output from HP SUM or
the HP BladeSystem c-Class OA flash
LOGFILENAME = "path"
utility to a different directory than the
default location.
* For Windows components, the
default location is %SYSTEMDRIVE%\
CPQSYSTEM\hp\log
and the redirected location is
.
* For Linux components, the default
location is /var/hp/log/
and the redirected
location is
.
SNMP read/write community
string
Specifies an SNMP read/write
community string for local host access.
(Applies to Linux PSP only.)
CMALOCALHOSTRWCOMMSTR
SNMP read-only community string
Specifies an SNMP read-only
community string for local host access.
(Applies to Linux PSP only.)
CMALOCALHOSTROCOMMSTR
IP address, DNS name
Specifies the IP address or DNS host
name of a system with read/write
CMAMGMTSTATIONRWIPORDNS
access to serve as a management
station. You can specify multiple
locations separated by a space.
(Applies to Linux PSP only.)
SNMP read/write community
string
Specifies an SNMP read/write
community string for a system with
CMAMGMTSTATIONRWCOMMSTR
read/write access that serves as a
48
Using scripts to deploy updates