Event log entry messages list – ADC HiGain H2TU-C-319 List 4E User Manual

Page 57

LTPH-UM-1049-02, Issue 2

Monitoring System Activity and Performance

H2TU-C-319 List 4E

January 9, 2002

Table 19.

Event Log Entry Messages List

Event Log Messages

Any DS1 Alarm History reset

Any DS1 PM register reset

Any HDSL2 Alarm History reset

Any HDSL2 PM register reset

Any Loop Down (any segment)

Any Loop Up (any segment)

Any provisioning option change: : changed from to

CPE DBER alarm (1-day threshold crossed of any PM data except PRM-NE or PRM-FE)

CPE DS1 AIS begins/ends

CPE DS1 LOS begins/ends

CPE PRM-NE BER alarm (at the remote only: 1-day threshold crossed of PRM-NE: trouble on CPE receive)

Current statistics reset

Event Log reset

H2TU-C Power up/down

H2TU-R Power up/down

HDSL2 DC pair open begins/ends on any segment

HDSL2 Ground fault begins/ends on any segment

HDSL2 HBER alarm (threshold crossed) on any segment.

HDSL2 loop attenuation (threshold crossed) on any HDSL2 interface

HDSL2 margin alarm (threshold crossed) on any HDSL2 interface

HDSL2 unavailability begins/ends on any segment

Master zero reset

NTWK DBER alarm (1-day threshold crossed of any PM data)

NTWK DS1 LOS begins/ends

NTWK PRM-FE BER alarm (at the remote only: 1-day threshold crossed of PRM-FE: trouble on NTWK far end)

NTWK DS1 AIS begins/ends

Power Feed Open begins/ends

Power Feed Short begins/ends

RAI begins/ends

TX RAI-CI begins/ends (RAI-CI sent from the remote towards the network)