ADTRAN Express L768 User Manual
Page 93
Chapter 3. Terminal Menu Operation and Structure
61203192L1-20
Express L768 User Manual
3-59
Communities/Manager IP
Write security: 1; Read security: 3
This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP
manager can access the Express L768 for this community.
SNMP/Traps
The Express L768 can generate SNMP traps. See SNMP on page C-1
for trap types supported. This list allows up to four managers to be
listed to receive traps.
Traps/Manager Name
Write security: 2; Read security: 4
This is the text string describing the name of the entry. It is intended
for easy reference and has no bearing on the SNMP trap function.
Traps/Manager IP
Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.
»» Management/Maint Port
The Express L768 has an EIA-232 connector on the back of the unit.
The setup for that port is under this menu.
Maint Port/Password Protect
Write security: 0; Read security: 1
When set to
No
, the maintenance port is not password protected.
When
On
(def), the Express L768 will prompt for a password upon
startup.
Maint Port/Password
Write security: 0; Read security: 1
This is the text string that is used for comparison when password pro-
tecting the maintenance port. By default, no password is entered.