ADTRAN Express L768 User Manual
Page 73
Chapter 3. Terminal Menu Operation and Structure
61203192L1-20
Express L768 User Manual
3-39
DLCI Mapping/DLCI
Write security: 3, Read security: 5
This is the DLCI associated with this virtual circuit. This value can
range from 16 to 1007.
DLCI Mapping/IP Map
Write security: 3, Read security: 5
This menu represents the IP protocol mapping that is to take place for
this DLCI.
IP Map/Active
Write security: 3, Read security: 5
When this is set to
Yes
(def), the Express L768 will attempt to trans-
port IP packets for this DLCI. A setting of
No
means that no IP traffic
or route will be exchanged.
IP Map/IARP
Write security: 3, Read security: 5
When this is set to
Yes
(def), the Express L768 will send Inverse ARP
packets to determine the IP address on the other end of the virtual cir-
cuit. If the IARP is responded to, a route is placed in the IP route table.
A setting of
No
means that the route address is to be assigned statical-
ly using the
IP Map/Far-End IP Address
parameter. The Express L768
will always respond to Inverse ARP requests.
IP Map/Far-End IP Address
Write security: 3, Read security: 5
This is the IP address of the device on the other end of the virtual cir-
cuit. When this DLCI becomes active, the Express L768 will add a
route in the IP routing table.