ADTRAN Express L768 User Manual
Page 75
Chapter 3. Terminal Menu Operation and Structure
61203192L1-20
Express L768 User Manual
3-41
IP Map/RIP Direction
Write security: 3, Read security: 5
This parameter allows the direction at which RIP advertisements are
sent and listened to be specified.
IP Map/NAT
The Express L768 can perform Network Address Translation over a
PVC. Setting this option to
On
will cause the Express L768 to translate
between the Ethernet addresses and the configured
Link IP Address
.
Only one PVC may be used for translation at one time. If more than
one IP Map is configured for NAT, the first PVC which is activated be-
comes the NAT port.
DLCI Mapping/IPX Map
This menu represents the IPX protocol mapping that is to take place
for this DLCI.
IPX Map/Active
Write security: 3, Read security: 5
When this is set to
Yes
(def), the Express L768 will attempt to transport
IPX packets for this DLCI. A setting of
No
means that no IPX traffic or
route will be exchanged.
Tx and Rx (def)
RIP advertisements are periodically trans-
mitted and are listened to on this virtual cir-
cuit.
Tx Only
RIP advertisements are periodically trans-
mitted but are not listened to on this virtual
circuit.
Rx Only
RIP is not transmitted on this virtual circuit
but they are listened to.