ADTRAN Express L768 - Manual (Page 139)

Appendix E. Terminal Mode Commands
61203192L1-20 Express L768 User Manual E-3
ADDITIONAL COMMANDS
Other commands available from the terminal mode are listed below:
DOWNLOAD/UPLOADING
CONFIGURATION
The Express L768’s configuration can be captured to a text file using
the download command. The text file can be edited if required. Up-
load of the configuration can be accomplished by sending the text file
to the Express L768 in terminal mode. A baud rate of 9600 is strongly
recommended when uploading. As soon as the upload has been com-
pleted, type
save to save the new configuration to flash. A reset com-
mand or power cycle 10 seconds after the save command is
recommended to ensure that the new configuration is complete.
save Saves the configuration to non-volatile RAM (flash).
mac Returns the MAC address for the Express L768.
version Returns the firmware version and routing stack
version.
reset Resets the unit.
exit Leaves terminal mode and returns to menus.
download Downloads complete configuration to the terminal
screen for capture.