ADTRAN Express L768 - Manual (Page 53)

Chapter 3. Terminal Menu Operation and Structure
61203192L1-20 Express L768 User Manual 3-19
set to No , the Express L768 will only respond to ARP requests received
for its own IP address.
» Configuration/IPX
The IPX menu is used to set up the IPX parameters for the Express
L768. Any general IPX-related configuration item can be found under
this menu. Figure 3-5 shows the IPX menu.
Figure 3-5. Configuration/IPX Screen
»» IPX/Mode
Write security: 2; Read security: 5
When this option is set to On (def), the Express L768 will route IPX.
Setting it to Off will disable all IPX functionality.
»» IPX/Network
Write security: 2; Read security: 5
The IPX network address for the Ethernet port is set here. This is an eight-digit
hexadecimal value that uniquely identifies the network segment of the Ether-
net port. Accidental selection of an IPX network which is already in use on an-
other network segment may cause hard-to-diagnose problems. IPX network
numbers should be carefully tracked.