ADTRAN Express L768 - Manual (Page 57)

Chapter 3. Terminal Menu Operation and Structure
61203192L1-20 Express L768 User Manual 3-23
WAN IP Bridge/Netmask
Write security: 2; Read security: 5
This is the network mask to be applied to the virtual Ethernet port.
WAN IP Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes , only IP RIP updates are sent when the routing table
has changed. When set to No (def), updates are sent periodically.
WAN IP Bridge/Proxy ARP
If this option is set to Yes (def), the Express L768 will proxy ARP on
the bridge IP port. See the section IP/Proxy ARP on page 3-18 for an ex-
planation of the proxy ARP function.
»» Bridge/WAN IPX Bridge
When IPX routing is active, the Express L768 will allow another WAN
device to bridge IPX packets to it using PPP BCP. Normally, two IPX
routers would negotiate PPP IPXCP to exchange IPX packets. How-
ever, if a device can only support PPP BCP, IPX packets are encapsu-
lated by the device as bridge packets. The Express L768 can treat the
WAN IPX Bridge as a virtual Ethernet port connected only to a WAN
device which has negotiated PPP BCP. This menu allows the IPX pa-
rameters for this virtual Ethernet to be set up.
WAN IPX Bridge/Network
Write security: 2; Read security: 5
This is the network address of the virtual Ethernet port. See IPX/Net-
work on page 3-19 for an explanation of the IPX network number.
RIP version, method, and direction are determined by the
Ethernet parameters set in the
Configuration/IP/IP
Router/RIP menu.