ADTRAN Express L768 - Manual (Page 63)

Chapter 3. Terminal Menu Operation and Structure
61203192L1-20 Express L768 User Manual 3-29
»» Security/Authentication
Write security: 1; Read security: 2
The method used for authenticating the PPP peer is selected here. The
possible values are:
See Configuration/PPP Profile on page 3-46 for more information on au-
thenticating.
»» Security/Radius Server
The parameters for the radius server are configured in this menu. The
RADIUS server can be used for authenticating a PPP peer (if defined
under
Security/Authentication ) and for Telnet server sessions.
Radius Server/Primary Server
Write security: 1; Read security: 2
This is the IP address of the first RADIUS server that the Express L768
should attempt to communicate with when authenticating a PPP peer.
Radius Server/Secondary Server
Write security: 1; Read security: 2
This is the IP address of the back-up RADIUS server that the Express
L768 should attempt to communicate with when the primary server
does not respond.
None (def) No attempt is made to authenticate the PPP peer.
Radius The Express L768 will act as a RADIUS client and
authenticate the PPP peer using the RADIUS serv-
er. The Radius server parameters must be set up
properly for this to work.
PPP Profile The PPP profile is used to authenticate the PPP
peer.