ADTRAN Express L768 User Manual
Page 48
Chapter 3. Terminal Menu Operation and Structure
3-14
Express L768 User Manual
61203192L1-20
Static Routes/Private
Write security: 4; Read security: 5
When set to
No
, the Express L768 will advertise this static route using
RIP. Otherwise, setting to
Yes
means that the route is kept private.
»» IP/IP Router
The IP router is configured under this menu as follows.
IP Router/Mode
Write security: 3; Read security: 5
When this option is set to
On
(def), the Express L768 will advertise and
listen to routes from other IP routers. If
Off
, the route table is still used
but only static routes are used for routing IP packets and only the
Ethernet port is used. IP packets can be sent over the WAN, but only
when bridged.
IP/RIP
Write security: 3; Read security: 5
The Routing Information Protocol (RIP) is supported by the Express
L768. The following parameters are required for setting up the mode
on the Ethernet port:
RIP/Mode
Write security: 3; Read security: 5
This option turns RIP
On
(def) or
Off
RIP/Protocol
Write security: 3; Read security: 5
Version can be
V1
(def) or
V2.