ADTRAN Express L768 User Manual
Page 47
Chapter 3. Terminal Menu Operation and Structure
61203192L1-20
Express L768 User Manual
3-13
»» IP/Default Gateway
Write security: 3; Read security: 5
The default gateway is used by the Express L768 for sending IP pack-
ets whose destination address is not found in the route table. If this
address is all zeros, then the first WAN connection becomes the de-
fault gateway.
»» IP/Static Routes
Static Routes can be inserted under this menu.
Static Routes/Active
Write security: 4; Read security: 5
Adds this static route entry to the IP routing table when set to
Yes
(def) and removes it (if it was previously added) if set to
No
.
Static Routes/IP Address
Write security: 4; Read security: 5
This is the IP address of the host or network address of the device be-
ing routed to.
Static Routes/Subnet Mask
Write security: 4; Read security: 5
This mask determines the bits in the previous IP address that are used.
If this is to be a host route, it must be set to all ones (255.255.255.255).
Static Routes/Gateway
Write security: 4; Read security: 5
This is the IP address of the router to receive the forwarded IP packet.
Static Routes/Hops
Write security: 4; Read security: 5
This is the number of router hops required to get to the network or
host. Maximum distance is 15 hops.