ADTRAN Express L768 User Manual
Page 49
Chapter 3. Terminal Menu Operation and Structure
61203192L1-20
Express L768 User Manual
3-15
RIP/Method
Write security: 3; Read security: 5
RIP/Direction
Write security: 3; Read security: 5
RIP/V2 Secret
Write security: 0; Read security: 0
This is a text string used to authenticate advertised routes.
»» IP/NAT
The Network Address Translation general parameters are set up un-
der this menu.
NAT/DHCP Mode
Write security: 3; Read security: 5
When this option is set to
On
, the Express L768 acts as a DHCP server
and will dynamically assign IP, network mask, default gateway, and
DNS addresses to any device which transmits a broadcast DHCP re-
quest. The addresses assigned are based on the Express L768’s own IP
address and will be within the same network. This mode is most com-
monly used with the NAT functionality. The default is
Off
.
Split Horizon
Only routes not learned on the Ethernet port
are advertised.
Poison Reverse
(def)
All routes are advertised, including routes
learned from the Ethernet port. These routes
are poisoned.
None
All routes are advertised, including routes
learned from the Ethernet port. No attempt is
made to poison these routes.
Tx and Rx (def)
RIP advertisements are transmitted and lis-
tened to on the Ethernet port.
Tx only
RIP advertisements are transmitted and not
listened to.
Rx only
RIP advertisements are listened to but not
transmitted.