Asus SABERTOOTH Z77 - Manual (Page 90)

3-26 Chapter 3: BIOS setup
Chapter 3
3.5.4 System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Configuration
Allows you to set the graphics configuration for primary display, iGPU memory, render
standby, and iGPU initiation functions.
Primary Display [Auto]
Allows you to select the IGFX/PEG graphics device for primary display.
Configuration options: [Auto] [IGFX] [PEG]
iGPU Memory [64M]
Allows you to select a pre-allocated graphics memory size to be used by the internal
graphics device.
Configuration options: [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M]
[320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable the rendered standby support.
Configuration options: [Enabled] [Disabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the iGPU Multi-Monitor. Set this item to [Enabled] to
activate the Lucid Virtu Universal MVP support function for empowering both integrated
and discrete graphics.
Configuration options: [Enabled] [Disabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
Main Ai Tweaker Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Configuration >
UEFI BIOS Utility - Advanced Mode
System Agent Bridge Name IvyBridge
Memory Remap Feature Enabled
> PCH Configuration
> NB PCIe Configuration