Asus SABERTOOTH Z77 - Manual (Page 87)

ASUS SABERTOOTH Z77 3-23
Chapter 3
3.5.2 PCH Configuration
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Enabled/Disabled the High Precision
Event Timer.
Back Advanced\ PCH Configuration >
UEFI BIOS Utility - Advanced Mode
PCH Configuration
High Precision Timer Enabled
> Intel (R) Rapid Start Technology
> Intel (R) Smart Connect Technology
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Disabled] [Enabled]
Intel (R) Rapid Start Technology
Allows you to enable or disable the Intel ® Rapid Start Technology function.
Intel (R) Rapid Start Technology [Disabled]
Configuration options: [Disabled] [Enabled]
Entry on S3 RTC Wake [Enabled]
Allows you to enable the system’s RTC (real-time clock) wake.
Configuration options: [Disable] [Enable]
Entry After [Immediately]
Allows you to set the system’s RTC (real-time clock) wake.
Configuration options: [Immediately] [1 minute] [2 minutes] [5 minutes] [10 minutes] [15 minutes]
[30 minutes] [1 hour] [2 hours]
Active Page Threshold Support [Enabled]
This function supports the Intel ® Rapid Start Technology with a small partition.
Configuration options: [Enabled] [Disabled]
Active Memory Threshold [0]
Key in the value for the additional partition size. For RST to work, ensure that the caching
partition size is larger than the total memory size. When set to [0], the system automatically
checks if the partition size is enough for the S3 entry (waketime entry).
The following four items above appear only when you set the Intel (R) Rapid Start
Technology item to [Enabled].
CPU C6 Report [Auto]
Allows you to disable or enable the CPU C6 report to OS.
Configuration options: [Auto] [Disabled] [Enabled]