Refilling chin rest paper, Replacing printing paper, Refilling chin rest paper replacing printing paper – Canon TX-20 Full Auto Tonometer User Manual
Page 74: E 74), E 74

74
6Maintenance
Refilling Chin Rest Paper
CAUTION
If the chin rest paper is not being used, be sure to disinfect the chin rest whenever the patient is
changed. For details on how to disinfect, see the Forehead Rest section.
1
Pull out the right and left chin rest holding pins.
2
Insert the holding pins into the holes on the right and left of the chin rest paper.
3
Attach the chin rest paper to the chin rest with the pins pressing into the holes on the
chin rest.
Insert the pins straight into the holes.
Chin rest paper is a consumable product (sold separately). To purchase chin rest paper, contact
your sales representative or local Canon dealer.
Replacing Printing Paper
Replace the roll of printing paper as soon as possible after the red line appears on the paper.
Do not replace the paper unless the TX-20 is correctly installed in a flat location as specified.
Changing the paper while the TX-20 is not level may cause a paper jam.
1
Open the paper cover.
Pressing the paper cover button releases the lock and raises
the paper cover.
CAUTION
Do not touch the area around the printer or open the paper cover during
or immediately after printing
The printer’s thermal head and the surrounding area are very hot during and immediately after
printing. To prevent burns, wait for the printer to cool before opening the paper cover to replace
paper.
L-IE-5191C_TX-20.indb 74
2013/07/18 13:10:39