Basic printing workflow, Printing procedure, Loading and printing on rolls – Canon imagePROGRAF iPF610 User Manual

Page 96: Basic printing workow

Text mode
Original mode

Printing procedure

Basic Printing Workow

Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.

Note

•

If a sheet is loaded in the Tray, remove it before this procedure. (→P.152)

•

Before printing banners or other large-format documents, spread a clean cloth or paper over the oor.
Otherwise, long sheets that touch the oor after printing may become dirty.

•

If you will wait for the ink to dry after printing and simply eject the document, you can deactivate

automatic cutting and print a cut line instead. (→P.135)

Turn the printer on. (→P.19)

Select roll paper as the paper source. (→P.120)

82 Basic Printing Workow