Canon imagePROGRAF iPF610 - Manual (Page 153)

Handling rolls
Paper Cutting (to have the roll cut at your specied position)
1.
If the printer stops operating after printing, press the Online button. The printer goes ofine.
2.
Press ▲ or ▼ to feed the roll paper to the position for cutting.
3. Press the Menu button to display MAIN MENU.
4. Press ▲ or ▼ to select Paper Cutting, and then press the ► button.
5.
Press ▲ or ▼ to select Yes, and then press the OK button.
After the roll paper is cut, it is rewound automatically.
Caution
• If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
Handling Paper 139