Canon imagePROGRAF iPF610 - Manual (Page 367)

Borderless Printing
Borderless Printing by Resizing Originals to Match the
Paper Size (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the paper size, based on the
following example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the
Roll Holder. (→P.150)
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Document: Any type
• Page size: 10×12 inches (254.0×304.8 mm)
• Paper: Roll
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
1.
Choose Page Setup from the application menu to display the Page Attributes dialog box.
2.
Select the printer in the B Format for list.
3. In the C Paper Size list, click the size of the original. In this case, click 10"x12".
Note
• All sizes are available in borderless printing if you resize originals to match the paper size.
4.
Click F OK to close the dialog box.
5. In the application, create an original that takes up the entire space of the paper size.
6.
Choose Print in the application menu.
Enhanced Printing Options 353