Canon imagePROGRAF iPF610 - Manual (Page 177)

Handling sheets
3.
Fan the stack before loading. Load the stack printing-side down and aligned lengthwise against
the far right corner of the Cassette.
4.
Squeeze the Guide Lever of the Width Guide (a) and slide it to the right until it touches the
edge of the paper lightly.
5. Similarly, squeeze the Guide Lever of the Length Guide (b) and slide it back until it touches the
edge of the paper lightly.
Important
• Do not set the Width Guide and Length Guide away from the paper or too tight against it. This
may cause feeding problems.
Handling Paper 163