Lines are misaligned, The length of printed images is inaccurate, Documents are printed in monochrome – Canon imagePROGRAF iPF610 User Manual
Page 684
Problems with the printing quality
Problems with the printing quality caused by the type
of paper
For paper-specic troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide.
(→P.112)
Lines are misaligned
Cause
Corrective Action
The Printhead alignment is not adjusted.
Adjust the Printhead alignment.
(→P.599)
(→P.601)
The length of printed images is inaccurate
Cause
Corrective Action
In the printer menu, Band Joint is specied in Feed
Priority.
To ensure the feed amount matches the paper size,
select Print Length in Feed Priority in the printer
menu and enter the amount for adjustment in Adjust
Length. You can adjust the feed amount in 0.02%
increments. (→P.50)
Documents are printed in monochrome
Cause
Corrective Action
In the Advanced Settings of the printer
driver, Monochrome, Monochrome (Photo),
Monochrome (BK ink), or Monochrome Bitmap is
specied in Color Mode.
In the Advanced Settings of the printer driver,
specify Color in Color Mode and try printing again.
The Printhead nozzles are clogged.
Print a test pattern to check the color ink nozzles and
see if they are clogged.
(→P.625)
670 Troubleshooting