Canon imagePROGRAF iPF610 - Manual (Page 516)

Windows
Color Settings Sheet: Monochrome (Windows)
The following settings are available on the Color Settings sheet for monochrome printing.
Color Adjustment : monochrome
On the Color Adjustment sheet for monochrome printing, you can adjust the brightness and contrast.
Note
• To display the Color Adjustment sheet, on the Main sheet, click Color Settings by Color Mode in
Advanced Settings. (→P.475)
Setting Item Description
A Preview The image at left is updated to reect any changes you make to setting
items on the sheet, enabling you to check the results of adjustment.
B Original The image at right shows the original state before adjustment. You can
compare it to the Preview image.
C Cyan
D Magenta
E Yellow
Not available.
F Brightness Adjust the overall image brightness as desired. You can adjust the
brightness if the printed document is lighter or darker than the original
image (that is, the original photo that was scanned or the original graphic
as it appears on the computer screen).
G Contrast Adjust the contrast of the darkest and lightest portions relative to each
other, as desired. Increasing the Contrast makes images sharper, and
reducing the Contrast softens images.
H Saturation Not available.
I Gray Tone Adjustment Not available.
J Object Adjustment Select this option to display the Object Adjustment dialog box, in which
you can specify objects subject to color adjustment.
S Defaults Click to restore all settings on the sheet to the default values.
502 Software