Canon imageCLASS D1350 - Manual (Page 98)

6-12
U
sing
the
Fax
Func
tions
Fax/Tel mode
You can receive faxes automatically (The telephone rings on an incoming call). To disable audible incoming rings, see
“Incoming Ring” ( →P. 6-25)
You can answer incoming calls by picking up the handset.
Operation for when an incoming call is received
An incoming call rings for the specified number of times. *1
When you do not pick up the handset
within the specified number of times
When you pick up the handset within
the specified number of times
When the call is a fax When the call
is a voice call
You can hear a
beep.Following the
procedure below, receive the
fax.
(1) Press [Fax].
(2) Select
using [ ] or [ ] and
press [OK].
(3) Hang up the handset.
You can start
talking as is.
The machine judges whether the
incoming call is a fax or voice call. *2
When the call is
a fax
When the call is
a voice call
The machine receives
the fax automatically.
The telephone rings. *3
When you pick up the
handset during ringing
When you do not pick up
the handset during ringing
You can start talking as is. The machine hangs up the
telephone or switches to the fax
receive mode. *4
* 1 You can change the incoming call ring time using “Incoming Ring” ( →P. 6-25)
* 2 To set a ring delay before the telephone starts ringing on an incoming call, go to the option.
* 3 To adjust the incoming call ring time, go to the option.
* 4 To specify how the machine behaves when you do not answer an incoming call, go to the option.
For more information on these options, see “Advanced Settings for the Fax/Tel Auto Switch Mode” ( →P. 6-14)