Canon imageCLASS D1350 - Manual (Page 100)

6-14
U
sing
the
Fax
Func
tions
Changing the Receive Mode
Select the receive mode that you want to use.
NOTE
About the external telephone
The machine may not be able to send or receive faxes properly,
depending on the type of telephone connected to it.
Keys to be used for this operation
OK
FAX
1
Press [ ].
2
Select using [ ] or [ ] and press
[OK].
Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 1 ...
3
Select the receive mode using [ ] or [ ] and
press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answering Machine
When is selected
Proceed to specify the advanced settings. See “Advanced Settings
for the Fax/Tel Auto Switch Mode” (
→P. 6-14)
If you select
Select a ring pattern using
[ ] or [ ] and press [OK].
Advanced Settings for the Fax/Tel Auto
Switch Mode
Set the advanced settings for the Fax/Tel Auto Switch mode.
Keys to be used for this operation
OK
FAX
1
Press [ ].
2
Select using [ ] or [ ] and press
[OK].
Specify destination.
01/01/2011 12:52AM
RX Mode: Auto
Resolution: 200 x 1
...
3
Select using [ ] or [ ]
and press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answering Machine
4
Select the option using [ ] or [ ] and press [OK].
Fax/Tel Auto Switch
Ring Start Time: 6
Incoming Ring Time: ...
After Ring: RX
Set the duration during which the
machine tries to detect fax tones before
the telephone starts ringing.
Set the duration somewhere between 5 to
30 seconds and press [OK].
Set the duration during which the
telephone keeps ringing when an
incoming call comes.
Set the duration somewhere between 15
to 300 seconds and press [OK].
Action After Ring
Specify how the machine behaves when
an incoming call is not answered.
Select or and press [OK].
- : Disconnect the call.
- : Receive an incoming fax.
5
Select using [ ] or [ ] and press [OK].
The changes are saved.
Fax/Tel Auto Switch
Ring Start Time: 6
Incoming Ring Time:
...
After Ring: RX