beautypg.com

Document type, Supported document types, Scan area – Canon imageCLASS D1350 User Manual

Page 38: Copy, Document type scan area

background image

2-2

D

ocumen

t and
P

aper

Handling

Supported Document Types

Platen Glass

Feeder

Type

• Plain paper

• Heavy paper

• Photograph

• Small documents (for example, index cards)

• Special types of paper (for example, tracing paper,

transparencies, etc.)*

1

• Booklet (Up to 3/4” (20 mm) thickness)

Plain paper

(Multi-page documents of the same size, thickness and

weight/one-page documents)

Size (W x L)

Up to 8 1/2” x 14” (216 mm x 356 mm)

Maximum size: 8 1/2” x 14” (215.9 mm x 355.6 mm)

Minimum size: 5 1/2” x 5” (139.7 mm x 128 mm)

Weight

Up to 4.4 lb (2 kg)

1-sided scanning (1 page): 13 to 28 lb Bond (50 to 105g/m²)

2-sided scanning: 17 to 28 lb Bond (64 to 105 g/m²)

Paper Capacity

1 sheet

Up to 50 sheets (Letter)*

2

Up to 30 sheets (Legal)*

2

*1

To copy transparent documents (for example, tracing paper or transparencies), make sure to place the documents face down on the platen glass

and cover them with plain white paper.

*2

22 lb Bond (80 g/m²)

IMPORTANT

To place your document

Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen glass or into the feeder.

To prevent paper jams in the feeder

Do not use any of the following.
• Wrinkled or creased paper
• Carbon paper or carbon-backed paper
• Curled or rolled paper
• Coated paper
• Torn paper
• Onion skin or thin paper
• Stapled or clipped documents
• Paper printed by a thermal transfer printer
• Transparencies

Document Type

Scan Area

Make sure that your scan area fits within the shaded area, as shown in the illustrations on the following page.

* Note that the margins indicated in the illustrations are for your reference. Actual margins can vary.
* Refer to the following document loading orientation.

• Platen glass: With the document face down
• Feeder: With the document loaded in the document feeder tray

Copy

Platen Glass

Feeder

9/32"

(7 mm)

9/32"

(7 mm)

9/32"

(7 mm)

9/32"

(7 mm)

9/32"

(7 mm)

9/32"

(7 mm)

9/32"

(7 mm)

9/32"

(7 mm)

* See “Printable Area” (

→P. 2-8) if you would like to know the practical printable area.

This manual is related to the following products: