Canon imageCLASS D1350 - Manual (Page 70)

4-4
Prin
ting
fr
om
a C
omput
er
2
Select [N on 1] from [Page Layout] (where “N” is
the number of pages you want to print on the
sheet).
NOTE
If you cannot select the options for [Page Layout], display the
[Device Settings] sheet, and then select [Auto] or [Enabled] from
[Spooling at Host]. For instructions on how to display the [Device
Settings] sheet, see “Setting the Printer Options”in the e-Manual.
3
Select the page order from [Page Order].
The output image is displayed in the preview area.
4
Click [OK].
NOTE
• You cannot enlarge and reduce manually when using this
function.
• Although there may be a function for printing multiple copies
depending on the application you are using, do not use it
together with this function. If you do, printing may not be
executed correctly.
• The display may differ according to the operating system, as well
as the type and version of the printer driver.
1-sided Printing and 2-sided Printing
You can select whether to print on one side or both sides of
each sheet of paper. If the machine you are using supports
2-sided printing, the default setting is 2-sided printing.
IMPORTANT
Precautions on 2-sided printing
• Do not touch your document when making 2-sided printing
until the process is complete. After printing on the front side is
complete, the document is partially output, reserved, and fed
into the machine again for printing on the back side.
• Be sure to close the sub-output tray before making 2-sided
printing.
Printing to the back side of printed document
(Manual 2-sided printing)
2-sided printing can be performed manually using a printed
document. Place a printed document in the multi-purpose tray to
print on the back side*.
To print on the back side of a printed document, smooth out the
curling edges of the sheets and place them one by one in the
multi-purpose tray.
* This feature is supported only for sheets printed from this
machine. You cannot make a print on the printed side again.
1
According to the paper size for 2-sided printing,
ensure to set the paper size switch lever
accurately.
* If not securely attached, documents may not be fed properly, or
jammed.
(1) Open the lower rear cover.
(2) Securely place the blue color paper size switch lever (A).
• A4: Pull
• Letter, Legal: Push
(A)
(A)
(3) Close the lower rear cover.