Canon imageCLASS D1350 - Manual (Page 107)

6-21
U
sing
the
Fax
Func
tions
The default settings are a set of standard settings
predetermined by the machine. These settings become
effective when the machine is turned ON and OFF, or when
[
] (Reset) is pressed to revert to the default settings.
You can change the following default settings based on your
needs.
• Resolution
• Density
• 2-Sided Original
• Sharpness
Keys to be used for this operation
OK
Menu
1
Press [ ] (Menu).
2
Select using [ ] or [ ] and press
[OK].
Menu
Timer Settings
Common Settings
Copy Settings
Fax Settings
3
Select using [ ] or [ ]
and press [OK].
Fax Settings
Basic Settings
TX Function Settings
RX Function Settings
RX Print Settings
4
Select using [ ] or [ ] and
press [OK].
TX Function Settings
Change Defaults
Register Unit Name ...
ECM TX
Pause Time
5
Select the item using [ ] or [ ] and press [OK].
• Resolution/Density/Sharpness
For more information, see “Changing the Scan Settings (Fax)”
(
→P. 6-3)
Change Defaults
Resolution: 200 x 10
Density: 0
2-Sided Original: O
...
+
-
6
Select using [ ] or [ ] after you have
specified the setting and press [OK].
Change Defaults
Resolution: 200 x 1
...
Density: 0
2-Sided Original: O
...
+
-
7
Press [ ] (Menu) to close the menu screen.
Changing the Default Fax Settings