Canon imageCLASS D1350 - Manual (Page 154)

9-16
Troubleshooting
Paper Creases
Try one of the following to solve the problem.
The paper stack is not loaded correctly.
Solution
Load the paper stack correctly.
“Loading Paper” ( →P. 2-9)
Damp paper is used.
Solution
Replace the paper stack with new unopened one.
e-Manual → Specifications → Paper → Supported Paper Types
The paper type loaded is not appropriate.
Solution
Make sure that the number of sheets or the paper type loaded in the paper drawer or multi-purpose tray meets the
paper specifications.
e-Manual → Specifications → Paper → Supported Paper Types
There is a foreign object inside the machine.
Solution Remove the foreign object from the machine.
Paper creases due to the paper type used or usage conditions of the machine.
Solution
Change the setting from the operation panel.
e-Manual → Maintenance → Special Mode
The effect becomes greater as the number goes up.
→ →
(low) (high)
* Paper curls and creases can be minimized by changing the paper type and usage conditions, without needing to
change the setting.
* The more effective the setting becomes, the slower the print speed.