Canon VB-M40 - Manual (Page 94)

5
-30
[Change Ratio (%)], contour lines take on the same color
as the detection area, indicating that “detected” mode
has been triggered to ON.
Note
Right-click on the Intelligent Function Setting Tool display screen
to display the menu. There, the following functions can be used.
[Copy detection area]
Copy the detection area of the detection setting selected.
[Paste detection area]
Paste the copied detection area to the detection setting
selected.
It cannot be copied to camera tampering detection.
[Clear detection area]
Clear the detection area of the detection setting selected.
It cannot be cleared in camera tampering detection.
[Copy detection criteria settings]
Copy the detect criteria of the detection setting selected.
[Paste detection criteria settings]
Paste the copied detect criteria to the detection setting
selected.
[Copy event settings]
Copy the event operations of the detection setting selected.
[Paste event settings]
Paste the copied event operations to the detection setting
selected.
Contour of camera
tampering object