Canon VB-M40 User Manual
Page 89
Intelligent Function Setting Tool
5
-25
5
A
d
min T
ool
s
7
[Display Options]
Select the [Detection Area] or [Detection Results] you
want to show in the image display area from the
following items.
• [Selected Detection Settings Only]
Show only the detection areas or detection results
for detection settings selected in the detection
setting list.
• [All Detection Settings]
Show the detection areas or detection results for all
detection settings in the detection setting list.
• [Detection Settings of the Same Type]
Show the detection areas or detection results for the
same type of detection settings as those selected in
the detection setting list.
• [Do not Display]
No detection areas or detection results are shown.
8
[Restart intelligent function]
If the background image has changed while you were
specifying settings or detection results are not as set,
etc., click this button to restart intelligent function.
9
[Lock camera position] checkbox
Select this checkbox to move the camera position to a
preset position selected from the preset selection box
and lock it there. Lock the camera position when
specifying detection settings to obtain a correct
detection result.
If camera control privileges are not obtained, this
function is grayed out.
A
q
Camera position selection box
Select the camera position from the view restriction
presets or the home position. Use the Preset Setting
Tool to set presets or the home position (P. 5-16).
A
a
[Detection Setting List]
A list with the specified detection settings is shown.
A
s
[Add]
The [New Detection Settings] dialog box is shown and
detection settings can be added.
A
d
[Delete]
Delete detection settings selected from the detection
setting list.
A
f
[Detection Setting Number], [Detection Type]
The detection setting numbers and detection types
selected from the [Detection Setting List] are shown.
A
g
[Enable these detection settings] checkbox
Select this checkbox to enable the detection settings
that are selected in the detection setting list.
A
h
[Detection Criteria] tab, [Event] tab
Switch between the Detection Criteria and Event tabs.
• [Detection Criteria]
Specify detection setting name, detection area, and
detection criteria (P. 5-27).
• [Event]
Specify operations to be performed when events
A
j
[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
A
k
[Save settings]
Save the edited detection settings in the camera.
After the detection settings have been specified, be
sure to save the settings in the camera by clicking
[Save settings].
Important
It takes several ten seconds for intelligent function to restart.
No detection is performed while restarting.