Canon VB-M40 - Manual (Page 79)

View Restriction Setting Tool
5
-15
5
A
d
min T
ool
s
Note
• Even when view restrictions are set, an area outside the view
restriction may still appear momentarily when the camera is
controlled near the boundary of the view restriction.
• To cancel the view restrictions, clear the [Apply the view
restriction] checkbox and then click [Save settings].
• If the setting fields are cleared while the [Apply the view
restriction] checkbox is selected, the maximum view restriction
will be set.
• The controllable range and range that can be captured are as
follows.
• The pan and tilt ranges vary depending on the zoom ratio
(view angle).
• If the view restriction will be exceeded as a result of controlling
the zoom toward the wide-angle side, the camera will first pan
and tilt to a position where the maximum wide-angle zoom will
be within the viewing restriction area. Wide-angle zoom control
will then be enabled within the view restriction area.
• Reducing the view restriction may also reduce the zoom range.
Important
• If you have changed the camera mounting method,
recapture the panorama image and register it again.
• The panorama screen may be slightly different from the
actual image. After view restrictions have been set, be sure
to confirm with the VB Viewer that the view restrictions have
been reflected correctly.
• Confirm the settings using the VB Viewer. (View restrictions
are not applied to the image display area of this tool, nor to
the Admin Viewer.)
• If the image stabilizer or digital zoom setting has been
changed, check the view restriction settings again.
Pan controllable area
Maximum horizontal captured area
Maximum wide-angle viewing angle
M
ax
imum
ve
rt
ic
al
ca
pt
ur
e ar
ea
Tilt c
ontrolla
ble
a
re
a
Setting view restrictions
automatically restricts
the camera operating
angle. When wide-angle is selected,
the capture of the camera
operating angle would exceed
the view restrictions if it
remained the same. Therefore, it
is narrowed automatically.
View restrictions
Camera operating angle
Captured image range
Camera
Zoom
out
Captured image
Restricted view angle
Zoom
out
First, the center of the
maximum wide-angle
zoom is panned and
tilted. After panning and
tilting, wide-angle zoom
control is enabled within
the view restriction.