Canon VB-M40 User Manual

Page 59

[SSL/TLS] HTTP Communication Encryption Settings

-29

ting Page

[Self CA Certificate]
Used for the purpose of testing SSL communications,

but otherwise not normally used.

[Backup]

Click [Exec] to perform a backup of the certificates and

private key. This operation can only be performed via

SSL communications.

[Restore]
Installs the certificates and private key from backup.

Click [Browse] to select the backup file, then click

[Exec]. This operation can only be performed via SSL

communications, and will take effect after rebooting.

Encrypted Communications

[SSL Communications]
Set SSL communications to [Disable] or [Enable]. The

setting will take effect after rebooting.

However, if no certificate is installed, SSL

communications cannot be changed to [Enable].

Note

• It may take 15 minutes or more to generate an SSL key.

• If SSL communications are used, video transmission

performance drops.

• Depending on the type of the certificate being installed on the

camera, a dialog box may not appear indicating whether the

web browser has accepted the certificate and a connection

cannot be made.
In this case, the procedure below to register the CA certificate

in the web browser.