Canon VB-M40 - Manual (Page 91)

Intelligent Function Setting Tool
5
-27
5
A
d
min T
ool
s
Setting Intelligent Function Detection
Settings
„ Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
1 [Detection Setting Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Setting Name], ASCII characters
(spaces or printable characters) can be used.
2 [Area Shape]
Select [Rectangular] or [Polygonal] for the shape of
detection areas you want to set in the image display
area.
For details on detection area setting operations, see
“Setting Detection Areas” (P. 5-28).
[Clear]
If the [Area shape] is [Polygonal], the detection area
set in the image display area is deleted.
3 [Display Color]
Choose the color of the detection setting. The color
selected here becomes the display color of the
detection area in the image display area.
4 [Object Size (%)], [Change Ratio (%)], [Duration (Sec)]
Set the lower limit for the size, change ratio, and
judgment time for the set detection area to trigger
detection. If the value set here is exceeded, “Detected”
mode is triggered.
Click the text box to enter a value directly, or specify a
value using the slider.
For details on the setting method, see “Setting
Detection Criteria per Detection Type” (P. 5-28).
„ Setting Event Operations ([Event] tab)
Set operations to be performed upon detection of
changes in a subject.
[Event] tab
1 Specify the operation timing. (Multiple checkboxes can
be selected.)
[ON Event Operation] checkbox
When selected, the operations set in 2 [E-mail
Notification] and [Upload] are performed the moment
detected mode is triggered to ON.
[OFF Event Operation] checkbox
When selected, the operations set in 2 [E-mail
Notification] and [Upload] are performed the moment
detected mode is triggered to OFF.
[Detected mode Operation] checkbox
When selected, the operations set in 2 [E-mail
Notification] and [Upload] are performed for as long as
detected mode is active.
2 Specify the event operation. (Multiple checkboxes can
be selected.)
[E-mail Notification] checkbox
When selected, e-mail notification is performed at the
timing set in 1. [E-mail Notification] must be set in
advance under [Upload] in the Setting page (P. 4-17).
1
3
4
2
[Detection Criteria] tab
Image Display Area
Detection Area
Important
• It is recommended that the detection criteria be set in a
condition as close as possible to the condition in which the
camera is actually used.
1
3
4
2