Canon VB-M40 - Manual (Page 85)

Preset Setting Tool
5
-21
5
A
d
min T
ool
s
8 [Speed (Z)]
Select [Slow] or [Fast] for the camera speed during
zoom.
9 [Pause (sec)]
Set the time at which the camera stops at the preset
position between 0 and 120 seconds in 5-second units.
A q [Add]
Add the preset to the tour schedule list.
A a [Change]
Change the speed or pause time between presets
selected from the tour schedule list.
Note
• Preset tour is not performed while the camera is being
controlled with viewers, Admin Tools, etc.
• Preset tour is not performed when control privileges are
obtained by RM-Lite.
„ Setting the Preset Tour
Select [For Viewers] or [Always].
The preset is registered in the tour schedule list. Up to
20 presets can be registered.
When [Preview] is clicked, the camera angle switches
to this preset, and the new angle can be checked in
the image display area.
When you want to delete changes made to the tour
schedule list and restore the settings registered in the
camera, click [Restore settings].
When you complete setting the tour schedule list, click
[Save settings]. The settings are saved in the camera.
Note
The home position cannot be added to the tour schedule list.
1 Select the touring method from the [Preset Tour]
selection box.
2 Select the preset number you want to add to the tour
schedule from the [Preset] selection box, and then
click [Add].
3 Select a preset in the tour schedule list and set the
pan, tilt, and zoom speeds using [Speed (PT)], [Speed
(Z)], and [Pause (sec)], as well as the time in seconds
during which the camera remains stationary at the
preset position. Then, click [Change].
4 Click [Save settings].
Important
If preset tour is used, do not use the intelligent function. Also
note that when [Auto] is set under [Day/Night], the pause time
may lengthen as counting starts only after the pan, tilt, and
zoom are in focus.