Canon VB-M40 - Manual (Page 129)

List of Log Messages
7
-15
7
A
ppendix
V401 Video input command error [crit]
V402 Video input frozen [crit]
V403 Video input error [crit]
V420 Could not start intelligent service [crit]
V421 Intelligent service error [crit]
„ Application (SD card) messages
M001 Starting and stopping of SD control module [info]
Description video%1 command error - %2 (%3) (V401)
%1 Video number
%2 Process description
%3 Error details
Meaning The video input function was stopped because a video input command could not be processed.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description video%1 stalled (V402)
%1 Video number
Meaning The video input function was stopped because video generation stopped.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description video%1 fatal error - %2 (V403)
%1 Video number
%2 Error number
Meaning The video input function was stopped because an error that does not permit recovery of the video input system was
detected.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description intelligent initialization error [%1] [%2]. (V420)
%1 Error number
%2 Cause of error
Meaning Failed to initialize intelligent service.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description intelligent working error [%1] [%2]. (V421)
%1 Error number
Meaning An error that does not permit recovery occurred while intelligent service was running.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description %1 sdctrl (M001)
%1 Starting or stopping
Meaning The SD control module (sdctrl) has started or stopped.