Canon VB-M40 - Manual (Page 126)

7
-12
B012 Audio client closed [info]
B101 Error request received [notice]
B102 Client connection denied [notice]
B103 Client forcibly disconnected [notice]
B201 Event notification failure [info]
B202 Event reception failure [info]
Description [%1] %2 closed n= %3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
Description %1 unusual request [%2] (B101)
%1 Client host IP address
%2 Error type (400 | 404 | ...)
Meaning The request was denied due to a command error (400) or parameter error (404).
Description %1 request denied [%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an authentication error (41), time specification error (42), insufficient resource
(43), specification of unsupported codec (45), specification of unpermitted user level (47), too many clients (49) or
invalid operation mode (4a).
Countermeasure 41: Check user name, password or user list used when connecting. 42: Check playtime or maximum connection time
settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user level
used when connecting. 49: Check client number settings. 4a: Check if usage of audio server is enabled.
Description %1 access denied [%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning Connection was initially permitted, but the setting has subsequently been changed to prohibit access, thereby
triggering a forced disconnection (the denial type is the same with B102).
Description cannot notify %1 event [%2] (B201)
%1 Event type (ald)
%2 Error number
Meaning The event notification failed.
Description cannot recv event [%1] (B202)
%1 Error number
Meaning The event could not be received.