Canon VB-M40 User Manual
Page 54
4
-24
Note
If the same address is duplicated, the policy for the address that
appears highest on the list will be applied.
IPv6 Host Access Restrictions
1
[Apply Host Access Restrictions]
Set IPv6 host access restrictions to [Disable] or
[Enable].
2
[Default Policy]
If IPv6 host access restrictions are applied, select
[Authorize Access] or [Prohibit Access] for the default
policy.
3
[Prefix / Prefix Length]
Create a list of permitted hosts and restricted hosts and
set IPv6 address access for each host to [Yes] or [No].
You can specify the prefix length and set access
restriction by network or host.
If access is prohibited, access to all ports is restricted.
Important
• To prohibit access via a proxy server in HTTP connection, a
proxy server address must be set.
• If host access restriction is set mistakenly, access to the
setting pages themselves may be prohibited, in which case
restoring the factory default settings will become the only
means for recovery.