Brother MFC 9970CDW - Manual (Page 34)

Configuring your machine for a wireless network (For MFC-9560CDW and MFC-9970CDW)
29
3
k
Choose the Authentication method using a or b.
Do one of the following:
If you chose LEAP, go to step q.
If you chose EAP-FAST, go to step l.
If you chose PEAP, go to step l.
If you chose EAP-TTLS, go to step l.
If you chose EAP-TLS, go to step m.
l Choose the Inner Authentication method None, CHAP, MS-CHAP, MS-CHAPv2, GTC or PAP using a or b.
Go to step m.
Note
Depending on your Authentication method, the Inner Authentication method selections differ.
m
Choose encryption type TKIP or AES using a or b.
Do one of the following:
If your Authentication method is EAP-TLS, go to step n.
For other Authentication methods, go to step o.
n The machine will display a list of available Client Certificates. Choose the certificate and go to step o.
o Choose the verification method No Verification, CA or CA + Server ID using a or b.
Do one of the following:
If you chose CA + Server ID, go to step p.
For other selections, go to step q.
Note
If you have not imported a CA certificate in your machine, the machine will display No Verification.
To import a CA certificate, see Using Certificates for device security on page 107.
p Enter the server ID. (For information how to enter text, see the Quick Setup Guide.) Go to step q.
q
Enter the user ID you wrote down in step a. Press OK. (For information how to enter text, see the Quick
Setup Guide.)
Do one of the following:
If your Authentication method is EAP-TLS, go to step s.
For other Authentication methods, go to step r.