Brother MFC 9970CDW - Manual (Page 105)

Security features
100
9
h
Make sure that the SNMP setting is enabled, and then click Advanced Setting of SNMP.
i You can configure the SNMP settings from the screen below.
We have three SNMP connection modes of operation.
9
 SNMPv3 read-write access
With this mode the print server uses version 3 of the SNMP protocol. If you want to manage the print server
securely, use this mode.
Note
When you use the SNMPv3 read-write access mode, please note the following.
• You can manage the print server by using BRAdmin Professional 3, Web BRAdmin or Web Based
Management only.
• We recommend secure SSL communication (HTTPS) be used.
• Except for BRAdmin Professional 3 and Web BRAdmin, all applications that use SNMPv1/v2c will be
restricted. To allow the use of SNMPv1/v2c applications, use SNMPv3 read-write access and v1/v2c
read-only access or SNMPv1/v2c read-write access mode.