Brother ADS-1000W - Manual (Page 91)

Scan Using Your Computer
77
5
Change the Default Settings of a Button
5
You can change the default settings of the (Image), (OCR), (E-mail), and
(File) buttons.
1
Click the button while holding down the Control key and choose Software Button. The settings dialog
box will appear.
2
Choose the settings for File Type, Scan Type, Document Size, Brightness, Contrast, and
Continuous Scanning as needed.
You can also choose the setting for 2-sided Scanning.
3
Click OK. The new settings will be used as the default settings.