Brother ADS-1000W - Manual (Page 104)

Scan Using Your Computer
90
5
You can configure more settings in the Advanced Settings dialog box. Click the Advanced Settings button.
1 Depending upon the condition of the original document, this function may not work properly.
Setting Description Applicable Feature
Image
OCR E-mail File
Plastic Card
Mode Lets you scan cards, such as driver’s licenses or
insurance cards, using these automatic settings:
 Resolution: 600 dpi
 Document Size: 2 in 1 (Auto)
 2-sided Scanning: On (Short-edge binding)
 Auto Deskew: On
 Auto Image Rotation: Off
NOTE
• If you want to scan a plastic card with different settings,
set Plastic Card Mode to off and Resolution to 600 dpi.
• Load only one plastic card at a time.
Yes Yes Yes Yes
Setting Description Applicable Feature
Image
OCR E-mail File
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again. Yes Yes Yes Yes
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in gray
areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Yes Yes Yes Yes
Auto Deskew Corrects the skew (within 5 degrees) of the scanned
data.
1
Yes Yes Yes Yes
Auto Image
Rotation Changes the direction of the document based on the text
orientation.
1
Yes Yes Yes Yes