Brother ADS-1000W - Manual (Page 237)

Appendix
223
B
LED Indications (ADS-1000W only)
B
The LED indications shown in the table below are used in the illustrations in this chapter
The LED is on.
The LED is blinking quickly.
The LED is blinking slowly.
The LED is off.
Status Descriptions
Ready / 1 / 1 / 1 / 1 / 2 / 3 The machine is ready to scan.
Sleep Mode
The machine is in Sleep mode
(Power Save mode). The
machine acts as though it is
turned off. Do one of the
following to wake up the
machine:
 Press .
 Open the Top Cover.
 Load your document.
The machine will enter Ready
mode.
Selecting Scan
to PC
/
1
/
1
/
1
/
2
Scan to PC is selected. To
start scanning, press .
Selecting Scan
to USB
/
1
/
1
/
1
Scan to USB is selected. To
start scanning, press .
Selecting Scan
to Net Device 1
/
1
/
1
/
1
/
2
Scan to Net Device 1 is
selected. To start scanning,
press .
Selecting Scan
to Net Device 2
/ 1 / 1 / 1 / 2
Scan to Net Device 2 is
selected. To start scanning,
press .
Connecting
(Scan to PC)
Connection between the
machine and your device is in
progress.
Connecting
(Scan to Net
Device 1)