Brother ADS-1000W - Manual (Page 148)

Scan Using the Control Panel
134
6
2
Click the Scan to Net Settings button. The Web Based Management window will appear.
3
Select the device (Network Device 1 or Network Device 2) to which you want to assign the Scan to PC
feature.
NOTE
The Network Device 1 settings will be applied to on the Control Panel of the machine.
The Network Device 2 settings will be applied to on the Control Panel of the machine.
4
Select Scan to PC(Net Connect-XXXXXX) (XXXXXX is a scan type) from the Type drop-down list for
the selected device in 3.
5
Select the destination computer from the Destination drop-down list for the selected device in 3.
6
Click Submit.
7
Configure the settings if needed (see Change Scan to PC Settings (Windows ® ) on page 150 or Change
Scan to PC Settings (Macintosh) on page 156).
8
Load your document.
9
Press your configured key and then . The machine starts scanning.