Brother ADS-1000W - Manual (Page 150)

Scan Using the Control Panel
136
6
Scan Using Web Services (Windows Vista
®
SP2 or Later,
Windows
®
7 and Windows
®
8)
6
The menu that allows you to use Web Services for scanning is displayed in Destination in Scan to Network
Device from the Scan tab in Web Based Management (ADS-1000W only) or on the LCD of the machine
(ADS-1500W), if you have installed the driver for scanning via Web Services. For information about installing
Web Services, see Installing drivers used for scanning via Web Services (Windows Vista
®
, Windows
®
7 and
Windows ® 8) in the Network User’s Guide.
NOTE
If the LCD or LED indications show Out of Memory, decrease the Paper size setting or the Resolution
setting. For more information, see Configuring Settings for Scanning on page 138.
(ADS-1000W)
NOTE
If you have set up the machine using the USB interface method, you need to set up the machine using the
wireless network method with the installation DVD-ROM and a USB cable (see the Quick Setup Guide) to
display the Scan to Net Settings button in the ControlCenter application and to use the WS Scan feature.
1
Click the (ControlCenter4) icon in the task tray and then select Open from the menu.
The ControlCenter4 window will appear.
2
Click the Device Settings tab (the example below uses Home Mode).