Brother ADS-1000W - Manual (Page 54)

Scan Preparation
40
3
Plastic Cards
3
NOTE
• If the plastic card is embossed, insert the plastic card, the embossed side down, into the Card Slot.
• If the plastic card is not fed into the machine automatically, pull the plastic card out from the machine and
load it into the document feeder as you would load a business card (see Business Cards on page 36).
1
Close the Top Cover if it is open.
2
Adjust the Card Slot Guide (1) located at the back of the machine to fit the width of the plastic card.
3
Insert the plastic card into the Card Slot (1). The card will be fed into the machine.
1
1