Brother NC-7100W User Manual
Page 88
PRINTING FROM A MACINTOSH
®
7 - 2
Quick Tips:
1
The default name that will appear in the Print Center of
a Macintosh
®
will usually be
BRN_xxxxxx_P1_AT
(where
xxxxxx
is the last 6 digits of the Ethernet
address)
2
From a Macintosh
®
network, the easiest way to change this name
is to assign an IP address to the printer and then use a Web
browser to change the name. Connect to the printer using a web
browser and then click on Network Configuration. Enter the
password (the default password is
access
) then select
Configure AppleTalk. Click on
BRN_xxxxxx_P1_AT
,
then on Service Name. Enter the new name that you wish to
appear in Print Center. Then click on Submit.
3
The default password for Brother print servers is
access
.
4
See How to Print a Network Configuration Page on page
A-8 for information on how to print the Network
Configuration Page on your print server.
5
The Automatic Private IP Addressing (APIPA) protocol
automatically assigns an IP address from the range:
169.254.1.0 to 169.254.254.255. If the APIPA protocol is
disabled, the default IP address of a Brother print server
is 192.0.0.192. To change it, use the printer control panel
(if applicable), the BRAdmin Professional, Web
BRAdmin software or let your DHCP server allocate an
IP address to the printer.