Brother NC-7100W User Manual

Page 18

UNIX

PRINTING 1 - 4

Configure the

/etc/printcap

file on each host computer to

specify the local print queue, the print server name (also called
remote machine or rm), and the print server service name (also
called remote printer, remote queue, or rp), and the spool
directory.

An example of a typical printcap file:

laser1|Printer on Floor 1:\
:lp=:\
:rm=BRN_310107:\
:rp=TEXT_P1:\
:sd=/usr/spool/lpd/laser1:

This step applies to the majority of UNIX

systems, including

Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd
option required), DEC ULTRIX, DEC OSF/1, and Digital
UNIX

. SCO UNIX

users should follow these steps, but

should also refer to the SCO UNIX

Configuration section.

Users of RS/6000 AIX, HP-UX, Sun Solaris 2.xx, and other
systems that do not use the printcap file should skip to step
4. SCO user's should also skip to step 4 (SCO uses the
printcap file, but this file is automatically configured via the

rlpconf

command).

Make sure this information is added to the end of the printcap
file. Also make sure that the last character in the printcap file
is a colon ":".

This will create a queue named laser1 on the host computer
that communicates to a Brother print server with a node
name (rm) of BRN_310107 and a service name (rp) of
TEXT_P1 printing text files to a Brother printer through spool
directory

/usr/spool/lpd/laser1

. If you are printing

binary graphics files, you would use the service BINARY_P1
instead of TEXT_P1.