Brother NC-7100W User Manual

Page 82

NOVELL

NETWARE

PRINTING 6 - 18

■

Service is the name of the service assigned by NetWare

print server name (where the default services are

BRN_xxxxxx_P1

for the Brother printer, where

xxxxxx

the last six digits of the Ethernet address (MAC address)).

■

You can also enter the TREE and CONTEXT name using
your web browser, by connecting to the Brother print server
using the TCP/IP protocol and selecting the NetWare
protocol configuration.

Use the BRCONFIG command or TELNET command:

SET

NETWARE RESCAN

to force the print server to rescan for file

servers, or power cycle the printer.

Configuring the Brother Print Server
(Remote Printer Mode) Using PCONSOLE and
BRCONFIG

Make sure that the PSERVER NLM (NetWare

Loadable

Module) is loaded on your file server.

Log into the file server from your PC workstation as

ADMIN

if you

are using NetWare

4.1x (if you want NDS support, do not login

under bindery mode). If you are using NetWare

2.xx or 3.xx,

SUPERVISOR

Run the PCONSOLE utility from your PC workstation.

If you are creating a new print queue, select Print Queue
Information (NetWare

3.xx) or Print Queues (NetWare

4.1x)

from the Available Options menu.

The same service assigned by NetWare

print server cannot

be used for both queue server mode and remote printer
mode. If you want to enable remote printer capabilities on a
service other than the default NetWare

service, you must

define new services that are enabled for NetWare

and for

the desired port. Refer to Appendix in this manual for
information on how to do this.