Brother NC-7100W - Manual (Page 42)

PEER TO PEER PRINTING 3 - 4
8 Click the OK button. When prompted you must re-boot your
computer.
Associating to the Printer
You must now create a printer on your Windows ® system using the
standard Windows ® printer setup procedure.
1 To do this, go the Start button, select Settings and then
Printers.
2 Select Add Printer to begin the printer installation.
3 Click Next when you get the Add Printer Wizard window.
4 Select Local Printer when you are asked how the printers are
connected to your computer, and then click Next.
5 Select the correct driver. Click Next when you are done.
6 If you have selected a printer driver that is already being used,
you have the option of either keeping the existing driver
(recommended) or replacing it. Select the desired option and
click Next.
7 Select the Brother LPR port (the port name you assigned in step
6 of the “Installing the Brother Peer to Peer Software” section)
and click Next.
8 Enter any desired name for the Brother printer and click Next.
For example, you could call the printer "Networked Brother
Printer".
9 Windows ® will now ask you if you wish to print out a test page,
select Yes and then select Finish.
Windows ® 95/98/Me store the hosts file in the default
Windows ® directory. By default, the Windows ® hosts file is
called hosts.sam . If you wish to use the hosts file you must
rename the file to hosts with no extension. The .sam
extension stands for sample.