Brother NC-7100W - Manual (Page 37)

2 - 9 TCP/IP PRINTING
Open the LAN Services folder and execute the LAN Requester
program:
1 Select Definitions.
2 Select Aliases.
3 Select Printers.
4 Select Create. Enter the following:
5 Exit the LAN Requester program.
6 You should now be able to print. To test the queue, type the
following from either the OS/2 command prompt or from a DOS
workstation:
7 COPY C:\CONFIG.SYS \\servername\alias
8 Where servername is the name of the file server and alias is
the alias name that you specified during this configuration
process. This should print the
CONFIG.SYS file on the printer.
Note that if you selected a binary service as the LPD printer
name, the lines will be staggered; don't worry about this
because normal DOS, Windows
® , and OS/2 applications will
print OK.
9 The Brother print server will appear as a standard OS/2 printer
to application programs. To make the print server operate
transparently with DOS programs, execute the following
command on each workstation:
10 NET USE LPT1: \\servername\alias
Alias Should be same as the printer name
previously defined
Description Anything you want
Server name Name of OS/2 server
Spooler queue Name of printer as defined previously
Maximum number of users Leave blank unless you want to limit
the number of users